Cortical Bone Research Articles

Effect of plate orientation on apparent thickness of mineral plates by transmission electron microscopy.

Transmission electron microscopy (TEM) is widely used to study the ultrastructure of bone. The mineral of bone occurs as polycrystalline mineral plates about 3 to 6 nm in thickness. A problem in using TEM to make quantitative analyses of bone is that the orientation of the plates with respect to the plane of the section being imaged is expected to affect their apparent thickness. The purpose of this study was to test if this was true, if the apparent thickness of plates changed substantially as a result of tilt of the section. We prepared TEM sections of samples of cortical human bone by ion beam milling, orienting one section parallel to the collagen fibril axes and one perpendicular to them. We obtained TEM bright field and HAADF images of these sections, tilting the sections up to ± 20° at 2° intervals and measuring the apparent thickness of individual mineral platelets at each angle of tilt. Thickness appears to double as section is tilted ± 20°. True thickness of plates is determined by tilting the section along an axis parallel to the plate orientation and determining the minimum apparent thickness. However, as plates are tilted away from minimum-thickness orientation, they become less well-resolved, disappearing when tilted more than 20°. We therefore also measured apparent thickness of only the darkest (most electron scattering) plate images in an untilted section and obtained the same average thickness as that obtained by tilting. We conclude that tilting of the section is not necessary to obtain an accurate measurement of the thickness of mineral plates.

Immunohistochemical and Morphometric Assessment on the Biological Function and Vascular Endothelial Cells in the Initial Process of Cortical Porosity in Mice With PTH Administration.

To clarify the cellular mechanism of cortical porosity induced by intermittent parathyroid hormone (PTH) administration, we examined the femoral cortical bone of mice that received 40 µg/kg/day (four times a day) human PTH (hPTH) (1-34). The PTH-driven cortical porosity initiated from the metaphyseal region and chronologically expanded toward the diaphysis. Alkaline phosphatase (ALP)-positive osteoblasts in the control mice covered the cortical surface, and endomucin-positive blood vessels were distant from these osteoblasts. In PTH-administered mice, endomucin-reactive blood vessels with TRAP-positive penetrated the ALP-positive osteoblast layer, invading the cortical bone. Statistically, the distance between endomucin-positive blood vessels and the cortical bone surface abated after PTH administration. Transmission electron microscopic observation demonstrated that vascular endothelial cells often pass through the flattened osteoblast layer and accompanied osteoclasts in the deep region of the cortical bone. The cell layers covering mature osteoblasts thickened with PTH administration and exhibited ALP, α-smooth muscle actin (αSMA), vascular cell adhesion molecule-1 (VCAM1), and receptor activator of NF-κB ligand (RANKL). Within these cell layers, osteoclasts were found near endomucin-reactive blood vessels. In PTH-administered femora, osteocytes secreted Dkk1, a Wnt inhibitor that affects angiogenesis, and blood vessels exhibited plasmalemma vesicle-associated protein, an angiogenic molecule. In summary, endomucin-positive blood vessels, when accompanied by osteoclasts in the ALP/αSMA/VCAM1/RANKL-reactive osteoblastic cell layers, invade the cortical bone, potentially due to the action of osteocyte-derived molecules such as DKK1.

Cytotoxicity of novel hybrid composite materials for making bone fracture plates

Bone fracture plates are usually made from steel or titanium, which are much stiffer than cortical bone. This may cause bone ‘stress shielding’ (i.e. bone resorption leading to plate loosening) and delayed fracture healing (i.e. fracture motion is less than needed to stimulate callus formation at the fracture). Thus, the authors previously designed, fabricated, and mechanically tested novel ‘hybrid’ composites made from inorganic and organic materials as potential bone fracture plates that are more flexible to reduce these negative effects. This is the first study to measure the cytotoxicity of these composites via the survival of rat cells. Cubes of carbon fiber/flax fiber/epoxy and glass fiber/flax fiber/epoxy had better cell survival vs. Kevlar fiber/flax fiber/epoxy (57% and 58% vs. 50%). Layers and powders made of carbon fiber/epoxy and glass fiber/epoxy had higher cell survival than Kevlar fiber/epoxy (96%–100% and 100% vs. 39%–90%). The presence of flax fibers usually decreased cell survival. Thus, carbon and glass fiber composites (with or without flax fibers), but not Kevlar fiber composites (with or without flax fibers), may potentially be used for bone fracture plates.

Investigation of Skull Cortical Thickness Changes in Healthy Population and Patients With Schizophrenia on Computed Tomography Images.

Cortical bone thickness is essential for the mechanical function of bone. Some factors including aging, sex, body size, hormone levels, behavior, and genetics lead to changes in cranial cortical robusticity. Moreover, the skull is one of the hardest and most durable structures in the human body. Schizophrenia is defined as a psychiatric disease characterized by delusions and hallucinations, and these patients have reduced brain volume; however, there is no study including cortical bone structure. For this reason, the aim of this study was to determine whether there is a difference in the skull cortical thickness of patients with schizophrenia and, compare it with healthy subjects. The cranial length, cranial width, anterior cortical thickness, right and left anterior cortical thickness, right and left lateral cortical thickness, right and left posterior lateral thickness, and posterior cortical thickness were measured with axial computed tomography images of 30 patients with schizophrenia and 132 healthy individuals aged between 18 and 69years. A statistically significant difference was found between the two groups in the measurements of right and left posterior lateral thickness, and posterior cortical thickness (P = 0.006, P = 0.001, and P = 0.047, respectively). The sexes were compared, and it was found that the cranial width, anterior thickness, left anterior thickness, and right and left posterior thickness measurements of patients with schizophrenia showed a statistically significant difference compared with the control group (P < 0.001, P = 0.003, P = 0.001, P < 0.001 and P < 0.001, respectively). The authors observed that skull cortical thickness may be different in schizophrenia. The results obtained from this study may be beneficial for evaluating these structures for clinical and pathological processes. Furthermore, knowledge about the skull cortical thickness in planning surgical procedures will increase the reliability and effectiveness of the surgical method, and this will minimize the risk of complications.

Static and dynamic stress analysis of different crown materials on a titanium base abutment in an implant-supported single crown: a 3D finite element analysis

BackgroundThis Finite Element Analysis was conducted to analyze the biomechanical behaviors of titanium base abutments and several crown materials with respect to fatigue lifetime and stress distribution in implants and prosthetic components.MethodsFive distinct designs of implant-supported single crowns were modeled, including a polyetheretherketone (PEEK), polymer-infiltrated ceramic network, monolithic lithium disilicate, and precrystallized and crystallized zirconia-reinforced lithium silicates supported by a titanium base abutment. For the static load, a 100 N oblique load was applied to the buccal incline of the palatal cusp of the maxillary right first premolar. The dynamic load was applied in the same way as in static loading with a frequency of 1 Hz. The principal stresses in the peripheral bone as well as the von Mises stresses and fatigue strength of the implants, abutments, prosthetic screws, and crowns were assessed.ResultsAll of the models had comparable von Mises stress values from the implants and abutments, as well as comparable maximum and minimum principal stress values from the cortical and trabecular bones. The PEEK crown showed the lowest stress (46.89 MPa) in the cervical region. The prosthetic screws and implants exhibited the highest von Mises stress among the models. The lithium disilicate crown model had approximately 9.5 times more cycles to fatique values for implants and 1.7 times more cycles to fatique values for abutments than for the lowest ones.ConclusionsWith the promise of at least ten years of clinical success and favorable stress distributions in implants and prosthetic components, clinicians can suggest using an implant-supported lithium disilicate crown with a titanium base abutment.

Evaluation of the Relationship Between the Maxillary Sinus and Nasopalatine Canal of Maxillary Impacted Canines by Cone Beam Computed Tomography

Introduction. One of the critical parameters evaluated while planning orthodontic treatment for impacted canines in clinical practice is the relationship between impacted canines and adjacent anatomical structures. The nasopalatine canal (NPC) and maxillary sinus are anatomical formations that may be in close proximity to impacted canines. This study aimed to determine the relationship between palatally impacted canines, the maxillary sinus, and the NPC. Methods. A total of 105 impacted canines from 93 patients were evaluated using cone beam computed tomography (CBCT) images. The relationship between the impacted canine teeth, maxillary sinus, and NPC was assessed inside, outside, and at the border of the maxillary sinus floor and NPC walls. The millimetric distance between the impacted canine teeth and the borders of the maxillary sinus, the NPC, and the cortical bone of the palate was measured. Additionally, NPC morphology was assessed on the axial and sagittal CBCT images. Results. Of all the impacted teeth, 47.6% (3.8% inside, 43.8% at the border) were associated with the sinus, while 42.8% (15.2% inside, 27.6% at the border) were associated with the NPC. A significant moderate negative correlation (-0.32) was observed between age and the distance between impacted left canine teeth and the cortical bone of the palate. Additionally, when a Y-shaped NPC was present, the impacted canines were predominantly situated outside the canal. Conclusions. In this study, nearly half of the canines were located inside or at the border of the maxillary sinus and the NPC. Therefore, clinicians should carefully evaluate the relationship of impacted teeth with the maxillary sinus and the NPC during both orthodontic treatment and the extraction of impacted teeth.

Finite‐Element Analysis Study Comparing Titanium and Polyetheretherketone Caps in a Conometric Connection between Implant and Prosthesis

Prosthetic retention relies on the perfect adaptation between the cap and the abutment of a dental implant. The conometric connection ensures retention similar to cemented systems, preventing bacterial infiltration and sustaining a high implant success rate. Furthermore, the material used for the cap plays a crucial role in distributing stress on the implant components and bone. Traditionally, caps use titanium (Ti), but ongoing research investigates polyetheretherketone (PEEK) for its bone‐like qualities and similar elasticity to Ti. In this finite‐element analysis study, stress and strain distributions are compared between crestal and subcrestal implants using Ti and PEEK conometric caps, assessing retention through cap displacement to determine the material best suited for proper retention aligned with implant insertion depth. In the findings, an improvement in stress and strain is indicated on trabecular bone, a reduction in stress on cortical bone, and thus enhanced implant stability due to higher stresses around the implant threads, particularly with PEEK coping and subcrestal placement. Consequently, PEEK emerges as a promising substitute for Ti in conometric caps as it absorbs stress more effectively, distributing it across prosthetics to counter stress shielding and prevent implant failure.

Feasibility of Using Intraoperative Neurophysiological Monitoring for Detecting Bone Layer of Cervical Spine Surgery.

Intraoperative neurophysiological monitoring (IONM) as a guide to bone layer estimation was examined during posterior cervical spine lamina grinding. To explore the feasibility of IONM to estimate bone layer thickness. Cervical laminoplasty is a classic operation for cervical spondylosis. To increase safety and accuracy, surgery-assistant robots are currently being studied. It combines the advantages of various program awareness methods to form a feasible security strategy. In the field of spinal surgery, robots have been successfully used to help place pedicle screws. IONM is used to monitor intraoperative nerve conditions in spinal surgery. This study was designed to explore the feasibility of adding IONM to robot safety strategies. Chinese miniature pig model was used. Electrodes were placed on the lamina, and the minimum stimulation threshold of DNEP for each lamina was measured (Intact lamina, IL). The laminae were ground to measure the DNEP threshold after incomplete grinding (Inner cortical bone preserved, ICP) and complete grinding (Inner cortical bone grinded, ICG). Subsequently, the lateral cervical mass screw canal drilling was performed, and the t-EMG threshold of the intact and perforated screw canals was measured and compared. The threshold was significantly lower than that of the recommended threshold of DENP via percutaneous cervical laminae measurement. The DNEP threshold decreases with the process of laminae grinding. The DNEP threshold of the IL group was significantly higher than ICP and ICG group, while there was no significant difference between the ICP group and the ICG group. There was no significant relationship between the integrity of the cervical spine lateral mass screw path and t-EMG threshold. It is feasible to use DENP threshold to estimate lamina thickness. Cervical lateral mass screw canals by t-EMG showed no help to evaluate the integrity.

Treatment of femoral neck fractures using actis stem: complication rate in 188 uncemented hemiarthroplasties.

Cemented hemiarthroplasty (HA) is preferred in treating dislocated femoral neck fractures in elderly, osteoporotic patients, since uncemented HA was associated with mechanical complications more frequently. Cementation can conversely cause cardiopulmonary complications, leading to demand on safe, uncemented implants addressing osteoporosis. This study is set up as a retrospective feasibility study on the use of an uncemented, collared wedge implant (Actis®, DePuy Synthes, Warsaw, IN), for HA in elderly patients, focusing on complication rate. From 1,194 patients, treated with HA in two study centers between 2017-2022, 188 received Actis® uncemented stem with bipolar head. Complete follow-up were retrospectively collected in all patients. In 188 patients (f: 64.9%; age: 83.1 ± 7.7a) included, no case of intra-operative mortality was recorded. 2day mortality was 1.1%, 30day mortality was 7.4% and 1year mortality was 28.2%. 2 (1.1%) intra-operative fractures did not receive surgical revision, 3 (1.6%) post-operative periprosthetic fractures caused separate admission and revision. 2 cases (1.1%) of early infection required surgical revision. Our data provide proof of concept, that Actis® Stem allows an alternative, uncemented treatment option for displaced femoral neck fractures with HA. In case of preoperative or intraoperative medial cortical bone defects, stability of this implant is deteriorated.

Osteomodulin deficiency in mice causes a specific reduction of transversal cortical bone size.

Skeletal growth, modeling and remodeling are regulated by various molecules, one of them being the recently identified osteoanabolic factor WNT1. We have previously reported that WNT1 transcriptionally activates the expression of Omd, encoding Osteomodulin (OMD), in a murine mesenchymal cell line, which potentially explained the skeletal fragility of mice with mutational WNT1 inactivation, since OMD has been shown to regulate type I collagen fibril formation in vitro. In the present study we confirmed the strong induction of Omd expression in a genome-wide expression analysis of transfected cells, and we obtained further evidence for Omd being a direct target gene of WNT1. To assess the in vivo relevance of this regulation, we crossed Omd-deficient mice with a mouse line harboring an inducible, osteoblast-specific Wnt1 transgene. After induction of Wnt1 expression for 1 or 3weeks, the osteoanabolic potency of WNT1 was not impaired despite the Omd deficiency. Since current knowledge regarding the in vivo physiological function of OMD is limited, we next focused on skeletal phenotyping of wild-type and Omd-deficient littermates, in the absence of a Wnt1 transgene. Here we did not observe an impact of Omd deficiency on trabecular bone parameters by histomorphometry and μCT either. Importantly, however, male and female Omd-deficient mice at the ages of 12 and 24weeks displayed a slender bone phenotype with significantly smaller long bones in the transversal dimension, while the longitudinal bone growth remained unaffected. Although mechanical testing revealed no significant changes explained by impaired bone material properties, atomic force microscopy of the femoral bone surface of Omd-deficient mice revealed moderate changes at the nanostructural level, indicating altered regulation of collagen fibril formation and aggregation. Taken together, our data demonstrate that, although OMD is dispensable for the osteoanabolic effect of WNT1, its deficiency in mice specifically modulates transversal cortical bone morphology.

Biomechanical Effect of Different Posterior Fixation Techniques on Stability and Adjacent Segment Degeneration in Treating Thoracolumbar Burst Fracture With Osteoporosis: A Finite Element Analysis.

Finite element analysis. To investigate the biomechanical effect of four posterior fixation tcehniques on stability and adjacent segment degeneration in treating thoracolumbar burst fractures with osteoporosis. In terms of stability and adjacent segment degeneration, there remains no consensus or guidelines on the optimal technique for the treatment of thoracolumbar burst fractures in patients with osteoporosis. Images of CT scans were imported into MIMICS and further processed by Geomagic to build 3-dimensional models of the T10-L5 region. A v-shaped osteotomy was performed on the L1 vertebral body to simulate a burst fracture in the setting of osteoporosis. Subsequently, four fixation techniques were designed using SolidWorks software. Range of motion (ROM) of the global spine, ROM distribution, ROM of adjacent segment, Von Mises stress on adjacent intervertebral discs and facet joints were analyzed. Among the four groups, the cortical bone screw fixation (CBT) showed the highest global ROM at 1.86°, while long-segmented pedicle screw fixation (LSPS) had the lowest global ROM at 1.25°. The LSPS had the smallest percentage of ROM of fractured vertebral body to fixed segment at 75.04%, suggesting the highest stability after fixation. The maximum ROM of the adjacent segment was observed in the CBT at 1.32°, while the LSPS exhibited the smallest at 0.89°. However, the LSPS group experienced larger maximum stress on the adjacent intervertebral discs (9.60MPa) and facet joints (3.36MPa), indicating an increasing risk of adjacent segment disease. LSPS provided the greatest stability, while CBT provided the smallest amount of stability. However, the elevated stress on adjacent intervertebral discs and facet joints after LSPS fixation increased the possibility of adjacent segment degeneration. Cement-augmented pedicle screw fixation (CAS) and combined cortical bone screw and pedicle screw fixation (CBT-PS) demonstrated significant biomechanical advantages in providing moderate fixation strength while reducing stress on the intervertebral discs and facet joints.

Three-dimensional finite element analysis of the biomechanical properties of different material implants for replacing missing teeth.

The purpose of this study was to analyze the biomechanical properties of implants made of different materials to replace missing teeth by using three-dimensional finite element analysis and provide a theoretic basis for clinical application. CBCT data was imported into the Mimics and 3-Matic to construct the three-dimensional finite element model of a missing tooth restored by an implant. Then, the model was imported into the Marc Mentat. Based on the variations of the implant materials(titanium, titanium-zirconia, zirconia and poly (ether-ether-ketone) (PEEK))and bone densities (high and low),a total of eight models were created. An axial load of 150N was applied to the crown of the implant to simulate the actual occlusal situation. Both the maximum values of stresses in the cortical bone and implant were observed in the Zr-low model. The maximum displacements of the implants were also within the normal range except for the PEEK models. The cancellous bone strains were mainly distributed in the apical area of the implant, and the maximum value (3225μstrain) was found in PEEK-low model. Under the premise of the same implant material, the relevant data from various indices in low-density bone models were larger than that in high-density bone models. From the biomechanical point of view, zirconia, titanium and titanium-zirconia were all acceptable implant materials for replacing missing teeth and possessed excellent mechanical properties, while the application of PEEK material needs to be further optimized and modified.

Comparison of No Tap (two-step) and tapping robotic assisted cortical bone trajectory screw insertion.

Workflow for cortical bone trajectory (CBT) screws includes tapping line-to-line or under tapping by 1mm. We describe a non-tapping, two-step workflow for CBT screw placement, and compare the safety profile and time savings to the Tap (three-step) workflow. Patients undergoing robotic assisted 1-3 level posterior fusion with CBT screws for degenerative conditions were identified and separated into either a No-Tap or Tap workflow. Number of total screws, screw-related complications, estimated blood loss, operative time, robotic time, and return to the operating room were collected and analyzed. There were 91 cases (458 screws) in the No-Tap and 88 cases (466 screws) in the Tap groups, with no difference in demographics, revision status, ASA grade, approach, number of levels fused or diagnosis between cohorts. Total robotic time was lower in the No-Tap (26.7min) versus the Tap group (30.3min, p = 0.053). There was no difference in the number of malpositioned screws identified intraoperatively (10 vs 6, p = 0.427), screws converted to freehand (3 vs 3, p = 0.699), or screws abandoned (3 vs 2, p = 1.000). No pedicle/pars fracture or fixation failure was seen in the No-Tap cohort and one in the Tap cohort (p = 1.00). No patients in either cohort were returned to OR for malpositioned screws. This study showed that the No-Tap screw insertion workflow for robot-assisted CBT reduces robotic time without increasing complications.

Enhancing spinal bone anchor pull-out resistance with an L-shaped anchor.

The success rate of spinal fusion surgery is mainly determined by the fixation strength of the spinal bone anchors. This study explores the use of an L-shaped spinal bone anchor that is intended to establish a macro-shape lock with the posterior cortical layer of the vertebral body, thereby increasing the pull-out resistance of the anchor. The performance of this L-shaped anchor was evaluated in lumbar vertebra phantoms (L1-L5) across four distinct perpendicular orientations (lateral, medial, superior, and inferior). During the pull-out experiments, the pull-out force, and the displacement of the anchor with respect to the vertebra was measured which allowed the determination of the maximal pull-out force (mean: 123 N ± 25 N) and the initial pull-out force, the initial force required to start motion of the anchor (mean: 23 N ± 16 N). Notably, the maximum pull-out force was observed when the anchor engaged the cortical bone layer. The results demonstrate the potential benefits of utilising a spinal bone anchor featuring a macro-shape lock with the cortical bone layer to increase the pull-out force. Combining the macro shape-lock fixation method with the conventional pedicle screw shows the potential to significantly enhance the fixation strength of spinal bone anchors.

A randomized controlled clinical trial of concentrated growth factor combined with sodium hyaluronate in the treatment of temporomandibular joint osteoarthritis

ObjectiveTo investigate the effect of concentrated growth factor (CGF) combined with sodium hyaluronate (SH) on temporomandibular joint osteoarthritis (TMJOA).MethodsSixty patients with TMJOA who were diagnosed by cone-beam computed tomography (CBCT) between March 2020 and March 2023 at the Stomatological Hospital of Xi’an Jiaotong University were randomly divided into a control group (n = 30) and an experimental group (n = 30). The patients in the experimental group were treated with CGF + SH, and those in the control group were treated with SH only. The visual analogue scale (VAS) score indicating pain in the temporomandibular joint (TMJ) area; the Helkimo Clinical Dysfunction Index (Di); and changes in condylar CBCT at the first visit and 2 weeks, 3 months and 6 months after treatment were recorded. The CBCT data of the patients in the experimental and control groups were collected, and the three-dimensional CBCT image sequences were imported into Mimics Medical 19.0 software in DICOM format for condylar reconstruction.ResultsThe VAS scores at 2 weeks, 3 months and 6 months after treatment were significantly lower in the experimental group than in the control group (P < 0.05), and the pain in the experimental group was significantly relieved. The Di was significantly lower in the experimental group than in the control group (P < 0.05), and the clinical function of the TMJ improved. After treatment, the CBCT score was significantly lower in the experimental group than in the control group (P < 0.05), and the condylar bone cortex was obviously repaired. Observation of the condylar bone cortex by three-dimensional reconstruction showed the same results as those obtained by CBCT.ConclusionCGF combined with SH is effective in the treatment of TMJOA and can improve muscle pain, TMJ pain, Impaired TMJ function, Impaired range of movement, Pain on movement of the mandible and promote bone repair.The registration number (TRN)ChiCTR2400082712.The date of registrationApril 5, 2024.

Are osseous cyst‐like lesions in the subchondral bone of the proximal phalanx a precursor to fracture and how are they best managed?

SummaryOsseous cyst‐like lesions (OCLL) in the proximal subchondral bone of the proximal phalanx have been seen in association with fractures of the proximal phalanx and other bone abnormalities consistent with prodromal fracture pathology. There is reasonable circumstantial evidence to support that OCLL in this location can be a precursor to fracture. Repair of short incomplete sagittal fractures of the proximal phalanx with cortical bone screws placed in lag fashion has been associated with good clinical and variable radiographic outcomes. Stabilisation of OCLL by placement of a cortical screw in lag fashion appears a logical approach, but the outcome following surgery should be critically evaluated before a wider recommendation is made.

The comparison of visibility of the maxillary sinus septa between cone-beam computed tomography scans and panoramic radiograph images as dependent on the cortical bone thickness: a retrospective comparative study.

To analyze the visibility of the maxillary sinus septa (MSS) in panoramic radiography (PR) versus cone beam computed tomography (CBCT) and to investigate whether the buccal cortical bone thickness (BT) or the septa dimensions influence their visibility. Corresponding PR and CBCT images of 355 patients were selected and examined for MSS visibility. The septa dimensions (width, height, depth) and the BT were measured. Results were analysed statistically. Comparing the corresponding regions on CBCT and PR, 170 MSS were identified; however, only 106 of these were also visible using PR. The MSS visibility was significantly higher on CBCT versus PR images (P1: p = 0.039, P2: p = 0.015, M1: p = 0.041, M2: p = 0.017, M3: p = 0.000), except region C (p = 0.625). Regarding the measurements of MSS dimensions, only the height in region M1 (p = 0.013) and the width in region P2 (p = 0.034) were significantly more visible on CBCT. The BT in the area of the MSS was found to have a marginal influence on its visibility on the PR images only in regions M3 and M1 (M3: p = 0.043, M1: p = 0.047). In terms of MSS visibility based on the dimensions, significance was found for all three influencing variables only in region P2 (width; p = 0.041, height; p = 0.001, depth; p = 0.007). There were only isolated cases of further significance: M3 for width (p = 0.043), M2 for height (p = 0.024), and P1 for depth (p = 0.034), no further significance was noted. MSS visibility appears significantly higher on CBCT versus PR images. It is concluded that the septa dimensions and BT can influence MSS visibility on PR images just in certain regions.

Vascular function and skeletal fragility: A study of tonometry, brachial hemodynamics, and bone microarchitecture.

Osteoporosis and cardiovascular disease frequently occur together in older adults; however, a causal relationship between these two common conditions has not been established. By the time clinical cardiovascular disease develops, it is often too late to test whether vascular dysfunction developed before or after the onset of osteoporosis. Therefore, we assessed the association of vascular function, measured by tonometry and brachial hemodynamic testing, with bone density, microarchitecture, and strength, measured by high-resolution peripheral quantitative computed tomography (HR-pQCT), in 1391 individuals in the Framingham Heart Study. We hypothesized that decreased vascular function (pulse wave velocity, primary pressure wave, brachial pulse pressure, baseline flow amplitude and brachial flow velocity) contributes to deficits in bone density, microarchitecture and strength, particularly in cortical bone, which is less protected from excessive blood flow pulsatility than the trabecular compartment. We found that individuals with increased carotid-femoral pulse wave velocity had lower cortical volumetric bone mineral density (tibia: -0.21 [-0.26,-0.15] standardized beta [95% confidence interval], radius: -0.20 [-0.26,-0.15]), lower cortical thickness (tibia: -0.09 [-0.15,-0.04], radius: -0.07 [-0.12,-0.01]) and increased cortical porosity (tibia: 0.20 [0.15,0.25], radius: 0.21 [0.15,0.27]). However, these associations did not persist after adjustment for age, sex, height, and weight. These results suggest that vascular dysfunction with aging may not be an etiologic mechanism that contributes to the co-occurrence of osteoporosis and cardiovascular disease in older adults. Further study employing longitudinal measures of HR-pQCT parameters is needed to fully elucidate the link between vascular function and bone health.

Challenges in the Assessment of Medullary Bone Invasion in Oral Cavity Cancers and Its Prognostic Significance.

As per AJCC 8th edition TNM staging system, bone invasion is a poor prognostic marker that upstages oral cavity squamous carcinoma (OSCC) to pT4a. Cortical erosion alone of bone or tooth socket by a gingival primary is not sufficient to upstage a tumour. The differentiation of cortical erosion from invasion through the cortical bone into the medulla is often challenging, limiting accurate staging. This review aims to assess the difficulties in differentiating cortical erosion from medullary invasion and evaluate the prognostic significance of different patterns of bone involvement. A retrospective review of OSCC with primary curative surgery and bone resection treated at a single-center over 10years, was performed to assess the prognostic significance of bone invasion. Hematoxylin-eosin stained slides of a subset of cases were re-reviewed in a planned manner to assess difficulties in precise categorization (no invasion/erosion/cortical invasion and medullary invasion), evaluate interobserver agreement, and correlate with clinical outcome. Five hundred and ninety patients were included, with a median follow-up of 28months. On univariate analysis, the 3-year local, nodal and distant metastasis control were not significantly different in the 3 groups of no invasion, erosion, and invasion (p = 0.43, 0.47, and 0.47, respectively). Overall survival (OS) at 3years was 78.1% and disease-free-survival(DFS) was 63.7% in the entire cohort. On univariate analysis, there was significant difference in OS and DFS based on these groups. This did not translate into independent prognostic benefit on multivariable analysis (p = 0.75 and 0.19, respectively). The independent prognostic factors were margin positivity, tumor differentiation, perineural invasion and pathological nodal involvement. Planned re-review of a subset of 202 cases resulted in a change in bone involvement category in 26/202 cases, which was mainly due to difficulty in assessing cortico-medullary junction near the tooth socket and bone fragmentation. The assessment showed moderate to near complete agreement (kappa 0.59-0.82) between 2 observers. Our study shows that bone involvement is not an independent prognostic marker and there is no specific correlation of medullary invasion with outcome over those that showed cortical erosion. Several factors contribute to difficulties and interobserver variability in assessing bone involvement.

High-Resolution Ultrasound of Odontogenic Cutaneous Sinus Tract: An International Multicentric Experience and a Review of the Literature.

To investigate the role of high-resolution ultrasound (HR-US) in the initial and differential diagnosis of the Odontogenic Cutaneous Sinus Tract (OCST) in a multicentric setting. Skin HR-US examinations of OCSTs performed between January 2019 and June 2023 at different Institutions were retrospectively reviewed. Epidemiological and clinical data (age, gender, location of the skin lesion, causative tooth, and the clinical suspicion) as well as HR-US imaging findings (morphology and length of the sinus tract, Doppler signal, and cortical bone interruption of maxilla or mandible) were collected. US examinations were performed by expert radiologists using a high-performance US scanner, employing a high-frequency linear probe (15 MHz or higher frequencies). In only one patient the HR-US exam was integrated with strain elastography (SE). Sixteen patients were enrolled with a median age of 37.6 years (range 16-70 years). The most frequent clinical suspicion was epidermal cyst, while OCST was suspected in only two cases. In all cases, HR-US depicted the sinus tract as a nodular, triangular or "champignon-shaped" lesion in the subcutaneous layer, which continued with a slightly tortuous band structure, up to the focally interrupted cortical bone plate. Furthermore, color Doppler evaluation showed color signals around and/or within the lesion, expression of inflammation. On SE, the sinus tract showed a hard pattern, due to fibrous and granulomatous tissue. HR-US, thanks to its high spatial resolution, allows the evaluation of OCST, and play a crucial diagnostic role, mainly when the clinical suspicious is different.